Return to the BUILD

“In this stage you’ll build the horns for the Lamborghini Miura and fit them into the front frame. The parts supplied with this stage will be used later and can be stored away for now.”

Contents

Parts

Materials: The Reinforcement Crossbar is metal while the other parts are plastic.

Assembly Guide (Digital Version – click to download)

Agora Models consolidates the build instructions for Pack 8 (Stages 59 – 66) into a single digital PDF file:

Build

Assembling and Fitting the Horns

Step 1

Retrieve all of your parts supplied with the previous stage. Note how the two red Horns are different – Horn A has the tab farther away from the wide end than Horn B, as shown:

Push the Horn Rear Caps onto the pins of each Horn.

Each Horn Rear Cap has a Road Master decal on it. If you want the logo on these Caps to be at the top once mounted into the car, install them with the tabs of the Horns to your left, as shown:

Step 2

Press the tab of Horn A into the slot at this top end of the Horn Support:

Press the tab of Horn B into the other slot of the Horn Support, as shown:

Step 3

Retrieve your Front Frame assembly from the previous stage. Press the two pins of the Horn Support into the matching holes at this location on the Front Frame Cover, as shown.

When fully seated, the top edge of the Horn Support should be slightly below the neighboring frame:

Thoughts

I appreciate the tiny details of this model such as the decals on these Rear Horn Caps. They really help bring the car to life! Keep all of the parts supplied with this stage nearby as they will be needed in the next one.

Next Up

 Stage 60 – Front Shock Absorber, Front Left Lower Wishbone Arm, Wishbone Arm Brackets