Return to the BUILD
“For the first stage of Pack 7 you’ll attach the right door glass frame and fix the glass in place. The light button for the right door is installed ready for the switch in the next stage.”
Materials: All of these parts are plastic.
Assembly Guide (Digital Version – click to download)
Agora Models consolidates the build instructions for Pack 7 (Stages 51 – 58) into a single digital PDF file:
Fitting the Right Door Window Glass
Fit the holes of the Chromed Glass Frame over the matching posts of the Right Door Glass, as shown:
Retrieve your Right Door assembly from the previous stage. Fit this Right Door Glass assembly over these two posts, as shown:
Secure both parts to the Right Door with two (2) Type A screws.
Do not overtighten these screws as you risk cracking the plastic window piece. This is also your friendly reminder to try using 3-in-One Oil on all screws going into metal:
Fitting the Right Door Light Switch Button
Fit the round end of the Light Switch Button over this matching peg, with the post poking through the hole at the rear of the Right Door. Secure this button into place with one (1) Type A screw:
To ensure this Light Switch Button works correctly, we should be able to easily push it into the door slightly:
However, on my model this button was sticking in the hole of the door. Therefore, I sanded down the top of the post a bit. This worked perfectly:
Another door window complete! Keep this assembly nearby as we will add to it in the next stage.
Stage 52 – Right Door Panel/Cladding, Light Switch/Housing